L/S/C-band Antenna Feed
The drawing below depicts the mWAVE Industries, LLC model TLP06-33-S dual polarized wideband antenna feed.
The feed operates from 1435 MHz to 5150 MHz covering the L, S, and C telemetry bands. The introduction of this feed allows telemetry system designers to utilize the impending C-band frequency allocation. The feed is sealed within a UV stabilized radome that is suitable for outdoor use. The RF inputs are SMA female. Additional components (i.e. hybrids, filters, switches, etc.) can be added to the feed to satisfy custom requirements including multi-state dual circular and slant 45 polarization diversity schemes. Alternate mounting configurations and interface brackets are available upon request.
FREQUENCY (MHZ) | E-PLANE HPBW (DEG.) | H-PLANE HPBW (DEG.) | VSWR | PORT-TO-PORT ISOLATION (DB) |
---|---|---|---|---|
1435-5150 | 67 | 109 | 2.5:1 | 15 |
NOTE: An expanded band version operating from 1.2-8.0 GHz is also available. |
4FT DUAL LINEAR POLARIZED L/S/C-BAND ANTENNA
MODEL RPDL4-33-S 4FT DUAL LINEAR POLARIZED L/S/C-BAND ANTENNA
This antenna was designed for use with L/S/C-band telemetry requirements but can be used for any other communications requirement within the operating frequency band of the antenna. This 4FT diameter antenna is dual linear polarized, operating from 1.40 GHz to 5.15 GHz. The design incorporates our COTS mount for azimuth and elevation adjustment. The RF inputs are SMA female connectors and are located behind the focal point of the main reflector. The RF ports of the antenna are not phase-matched to one another.